2-component thin-layer polyurethane coating, suitable for concrete floor protection. Fully cured it displays a slightly shiny surface, which is UV resistant and is easily cleaned. Usually it is applied in one coat while in the case of extreme porosity of substrate two coats are recommended. Suitable for light mechanical loads, while total thickness does not exceed 300 μm. 

• Colours: RAL 7032, RAL 7040 on stock, other colours in accordance with RAL chart on order
• In case of high humidity it can be NOT applied, max. content of moisture is 4% (CM method)
• It can be applied only in thin layer
• For outdoor and indoor use
• Open time: approx. 60 min at +23°C
• Mixing ratio: A:B=2:1 (w/w)
• Component of KEMA FLOORSYSTEM C, SL-C