2-component thin-layer epoxy coating, suitable for floor protection in garages, warehouses, workrooms, etc., onto concrete, magnesite and anhydride substrates. For final coating of the cement based substrates in objects, where increased chemical resistant is required, e.g. car workrooms, parking houses,food-processing industry Fully cured it displays a slightly orange-shaped surface, which is chemical resistant and easily cleaned. Application in two or three coats, in this case suitable for light mechanical loads. As a third component dry quartz sand, EPOXY SAND, can be used which substantially increases mechanical resistance and is suitable for middle mechanical loads.

LASTNOSTI:

• Colours: RAL 7032, RAL 7040 on stock, other colours in accordance with RAL chart on order
• Increased wear and chemical resistance
• Part of KEMA FLOORSYSTEM EP-C1, EP-C2, EP-C3 and EP-SL-C
• For outdoor and indoor use
• Mixing ratio: A:B=4:1 (w/w)
• Temperature resistance of cured product, -30°C to +90 °C