2-component self-levelling polyurethane thick coating, suitable for concrete floor protection. Fully cured it displays a slightly shiny and elastic surface, which is well mechanical and chemical resistant and is easily cleaned. Usually it is applied in one coat while in the case of extreme porosity of substrate two coats are recommended (first coat is with thin polyurethane layer KEMAPUR FINAL 600). Suitable for high mechanical loads, total thickness is between 2 and 3 mm. If the UV stability is necessary it is recommended to use top-coat KEMAPUR FINAL 600 (polyurethane thin layer) on the covered surface. 

• Colours: RAL 7032, RAL 7040 on stock, other colours in accordance with RAL chart on order
• In case of high humidity it can be NOT applied, max. content of moisture is 4% (CM method)
• The minimum layer thickness is 1 mm
• For outdoor and indoor use
• Open time: approx. 20 min at +23°C
• Mixing ratio: A:B=5:1 (w/w)
• Component of KEMA FLOORSYSTEM SL, C, SL-C