Products > Products groups
BackKemaPrint
KEMAPOX ADHESIVE 220
2-C epoxy adhesive for system with C-LAMELLA
KEMAPOX ADHESIVE 220
2-component, solvent-free, thixotropic, epoxy adhesive, mentioned for bonding carbon fibre laminates (KEMA C-LAMELLA 150/200 CFK). The product characteristic of the fresh and hardened adhesive are designed specifically to satisfy the special requirements of the structural component reinforcement system. Age of concrete depends on climate condition, but has to be at least 6 weeks old. Variation in level must not exceed 0,5 cm over a length of 200 cm, otherwise levelling mortar, made from KEMAPOX ADHESIVE 220 and dry quartz sand EPOXY SAND ES 0,3-0,8 mm in mixing ratio 1:1, needs to be applied first.

LASTNOSTI:
  • Pot life approx. 60 minutes at +20°C
  • Hardens with minimum shrinkage
  • High mechanical and bond strength
  • Maximum substrate humidity 4%
  • Solvent-free
  • Ready-to-use (no need to add filler)
  • Thixotropic, so does not run or drip
CONSUMPTION:
Approx. 1.75 kg/m²/mm
PACKAGING:
  • 5 kg (4 kg of component A and 1 kg of component B)
  • 15 kg (12 kg of component A and 3 kg of comonent B)